Welcome to Boardsort™ - Learn - Sell - Profit -

New to scrapping. I have a partial pallet of switches. Two boards in each - see pics. Smaller board is very dense (heavy). I can't find an equivalent under the sample pics, but could very well be missing something obvious. Are either of these accepted? If so, what category would they grade under?

Thanks,
C

The top is low telco
The bottom is midgrade

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D

Thank you.

One more round of classification questions.

Img 6867 - Board on top in pic is periph, but high or low grade? What about other two boards?

Img 6866 - This is very similar to the pic I posted above that came back a mid-grade. Does the gold at the edge change this or still mid-grade?

Img 6864 - Laptop WAN card on the bottom, and various other cards with gold fingers. Same classification as clean GPU's or?

Thanks in advance.

All high peripheral

Mid grade. Cut the fingers off

The cards are gold finger card. The port extender is high peripheral.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D

Laptop docking station board. High perph?

Yes.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D

Telco boards from switches - should I remove the black aluminum cooling blocks or do they need to be left as-is?

The blocks and fan need to be removed.
The board is high peripheral.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D

Fan and power source assembly on upper left are separate from board in these, so I am good there. Have been pulling the blocks so will continue with that. I had just got to thinking about the scavenging stuff off motherboards discussion and wanted to make sure I wasn't taking something that was going to cause a value problem.