Depends on the type and age. Your value is definitely NOT in escrap! If it’s working there’s some real value in various parts. From a scrap perspective you’ve got the shell, frame, skeleton, and spine. All of which can be steel, aluminium, fibreglass, etc. The rack and feed are usually stainless steel but could be aluminium. A few pounds of various categories of wire. Glass if you have a buyer for it. Plastics, potentially wood. If it’s a hot/cold vender you’ll get copper, brass, pvc, abs, a compressor for cold units. Be careful with hot/cold units as there’s environmental requirements in the freon and oils. Scrap value ranges from under $10 to well over $50 and into the $100s depending mostly on if the structure is primarily wood, steel, or aluminium. In order of value low to high. Cold drin bottle vendors will always pay out the highest, followed by large size mixed temp, hot vendors, snack machines, small hot vendors (ie cup of coffee) and finally thin tall skinny glass shelf vendors, similar to but smaller than the snack machine shown above
_________________ 42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D
|