Welcome to Boardsort™ - Learn - Sell - Profit -

Thanks

20190725_201458.jpg - I'm leaning towards small socket motherboard given the expansion slots that are present and heavy IC density in the lower right corner.

20190725_201601.jpg - peripheral

20190725_201754.jpg - small socket, due to what appears to be a pinless ceramic CPU soldered to the board and several other flat pack ICs present.

20190725_201806.jpg - peripheral

20190725_201906.jpg - peripheral

20190725_202018.jpg - telecom

20190725_202055.jpg - peripheral

20190725_202228.jpg - telecom

_________________
kgryczan
Forum Moderator

I’ve been strongly hesitant to do this but kgryczan, I don’t think 20190725_201754 will make it to motherboard. Despite the soldered Cpu, bridge chip, and internal ports it’s missing both ram expansion and external gold pin connectors. It’s also under populated for the size. With nothing to offset the weight of the bare board, and only one cpu, I think this is still firmly in peripheral. Just not enough there to bump it over.
I’ve been looking at that for a few days now and the more I do the more I know it would go in my peripheral pile; though it would have sat out a few days as I made up my mind.
however
Op, post the back side. It looks like there’s some pinthrough on the right side of the board. If there’s any ICs on the back this could all be a moot point, as it may jump to low telco.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D

K i will check