Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Mon Oct 22, 2018 7:09 pm


Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sat Mar 12, 2016 12:38 pm 

Joined: Sat Mar 12, 2016 12:12 pm
Posts: 36
i recently scrapped out around 40 lcd monitors and was wondering what to grade certain boards at and what i could pull to increase the grades on these boards. i sorted out all of the obvious brown boards, but i some that are either mid grade or peripheral(no clue how to distinguish), and some thin boards with lots of gold plating but only a few ic type chips, lots of mlccs though. I also have a bunch of the cables that are attached to the actual lcd screens. not sure if theres any value to them or not but i have a few that are gold plated and the rest have some sort of chip on them. working on sorting out my first shipment and i want to know whats going to be worth sending in and what i should sell to my local yard( they only pay 10 cents a pound regardless of grade. ill do a little math on some of these but the low grades will not be shipped for sure. ill try take some pics in a little bit here.


Top
 Profile  
 
PostPosted: Sat Mar 12, 2016 12:48 pm 

Joined: Sat Mar 12, 2016 12:12 pm
Posts: 36
These are the cables from the lcd screens. 1.4 oz


Attachments:
image.jpeg
image.jpeg [ 3.04 MiB | Viewed 2236 times ]
Top
 Profile  
 
PostPosted: Sat Mar 12, 2016 12:51 pm 

Joined: Sat Mar 12, 2016 12:12 pm
Posts: 36
These are the lcd cables with gold plating. .2 oz


Attachments:
image.jpeg
image.jpeg [ 2.91 MiB | Viewed 2236 times ]
Top
 Profile  
 
PostPosted: Sat Mar 12, 2016 1:23 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4648
Location: Low DOS
Most boards in lcd screens run from mid grade (the power board) or peripheral for almost everything else. Smart TVs often have a SOC board that will go green fibre with metal or telco.
And finally very high end ones with total gold plated external connectors and a crap load of ICs on the connector boards will also usually get telco.

Those flat wire ribbons you posted.
I cut the contacts off. Gold contacts go with gold fingers
Silver contacts go with silver/tin ram and the wires go as mixed wire (for boardsort) or silver/nickel and/or flat wire for large local yards. I have never had one of those little black rectangles scanned so I'm not sure what the material is but i leave it on the wires.


Top
 Profile  
 
PostPosted: Sun Mar 13, 2016 1:59 am 

Joined: Sat Mar 12, 2016 12:12 pm
Posts: 36
Thanks for the reply. My internet was acting up so I couldn't finish posting pics. Here's the ones I was thinking might be peripheral?


Attachments:
image.jpeg
image.jpeg [ 2.99 MiB | Viewed 2209 times ]
Top
 Profile  
 
PostPosted: Sun Mar 13, 2016 2:00 am 

Joined: Sat Mar 12, 2016 12:12 pm
Posts: 36
These are the thin ones with lots of gold plate


Attachments:
image.jpeg
image.jpeg [ 3.29 MiB | Viewed 2209 times ]
Top
 Profile  
 
PostPosted: Sun Mar 13, 2016 2:01 am 

Joined: Sat Mar 12, 2016 12:12 pm
Posts: 36
These don't have much on them so I'm guessing they're low grade?


Attachments:
image.jpeg
image.jpeg [ 3.41 MiB | Viewed 2209 times ]
Top
 Profile  
 
PostPosted: Sun Mar 13, 2016 2:02 am 

Joined: Sat Mar 12, 2016 12:12 pm
Posts: 36
And here's the bulk of the haul sadly. Lots of brown boards. I'm assuming if it's a brown board it's basically automatically low grade?


Attachments:
image.jpeg
image.jpeg [ 2.87 MiB | Viewed 2208 times ]
Top
 Profile  
 
PostPosted: Sun Mar 13, 2016 2:13 am 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4648
Location: Low DOS
Everything you posted looks peripheral except the last bottom picture of power boards (low grade)


Top
 Profile  
 
PostPosted: Sun Mar 13, 2016 2:16 am 

Joined: Wed Mar 02, 2016 8:39 pm
Posts: 196
[edit] we posted at the same time! I pull the IC chips and transformers off the brown boards


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron