Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Sun Sep 24, 2017 4:35 am


Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Some pics for ident.
PostPosted: Sat Sep 17, 2016 7:01 pm 

Joined: Thu Aug 25, 2016 8:49 pm
Posts: 19
Appreciate all your help. I KNOW I am going to get lots of these wrong that is why I posted them! LOL
1) Multi-Lg socket (heat sink removed)
2) Teleco (but could go to Slot Processor)
3) I would go ahead and put it in LG socket, even with all the pinned ports through out the edges...)
4) LG multi Socket ? (what does the slot processor port count as?)
5) ???? (could go teleco with the pin count vs. lg items??
6) ??? (LG socket due to gold pin count??)
7)Teleco (got 4 of these I think)
8) Periph?
9) Dual socket (LG or Small? ) due to the slot processor slot? (WILL BE ADDING THE REMOVED CHIPS BACK BEFORE SHIPPING)


Attachments:
File comment: Removed the small heat sink already. with the multiple sockets and the gold plated ones /pins in lower right, would it go as Teleco or what?
Boardsort 1.PNG
Boardsort 1.PNG [ 1.75 MiB | Viewed 691 times ]
File comment: Slot processor or Teleco? YES, i replaced the chip in its holder! LOL
Boardsort 2.PNG
Boardsort 2.PNG [ 1.12 MiB | Viewed 691 times ]
File comment: Can't remember what this is from.. maybe a laptop? Grade?
Boardsort 3.PNG
Boardsort 3.PNG [ 1.92 MiB | Viewed 691 times ]
File comment: Has the Slot Processor slot ... a multi-LG socket?
Boardsort 4.PNG
Boardsort 4.PNG [ 1.8 MiB | Viewed 691 times ]
File comment: <shrugs>... Sm socket?
Boardsort 5.PNG
Boardsort 5.PNG [ 1.9 MiB | Viewed 691 times ]
File comment: from a Brocade fiberoptic stack. What grade? 3 or 4 of them.
Boardsort 6.PNG
Boardsort 6.PNG [ 1.79 MiB | Viewed 691 times ]
File comment: I know it is Telecom, but do I need to remove the stacks of LEDs and metal in the back?
Boardsort 7.PNG
Boardsort 7.PNG [ 1.52 MiB | Viewed 691 times ]
File comment: Peripheral?
Boardsort 8.PNG
Boardsort 8.PNG [ 1.72 MiB | Viewed 691 times ]
File comment: Would this be a multi-LG socket with the Slot processor in middle?
Boardsort 9.PNG
Boardsort 9.PNG [ 1.92 MiB | Viewed 691 times ]
File comment: The 'low grade' in front have Gold pins, what would they go in? Please ident type of green board.
Boardsort 10.PNG
Boardsort 10.PNG [ 1.36 MiB | Viewed 691 times ]
File comment: Do I need to remove the high profile RCA jacks? type of boards, Peripherial?
Boardsort 11.PNG
Boardsort 11.PNG [ 1.43 MiB | Viewed 691 times ]
Boardsort 12.PNG
Boardsort 12.PNG [ 1.08 MiB | Viewed 691 times ]
File comment: Long item across board was Al strip, removed. If the other big items marked were removed would it make Telco?
Boardsort 13.PNG
Boardsort 13.PNG [ 1.59 MiB | Viewed 691 times ]
File comment: Given population, would it go as Slot Processor vs. Gold Fingered?
Boardsort 15.PNG
Boardsort 15.PNG [ 1.3 MiB | Viewed 691 times ]
File comment: If three lg items removed, would it make it to telco or is it poor quality ICs?
Boardsort 16.PNG
Boardsort 16.PNG [ 1.23 MiB | Viewed 691 times ]
File comment: Fingers NOT Gold, silver/tin/nickel?
Boardsort 17.PNG
Boardsort 17.PNG [ 1.37 MiB | Viewed 691 times ]
Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sat Sep 17, 2016 8:40 pm 

Joined: Wed Mar 02, 2016 8:39 pm
Posts: 196
#1 Measure the pins, if it's 1 3/4 inches from pin to pin on the white socket, it's a large socket, the other sockets on the board are for expansion cards and sometimes on older systems, RAM expansion chips
#2 is probably telco not entirely sure.
#3 is from a laptop and is large socket
#4 isn't multi large socket, the only CPU socket on there is white, and yes, it's only large socket. The other sockets are ISA sockets for expansion, same as the other motherboard you have
#5 probably telco, not entirely sure
#6 Probably peripheral, not enough population for telco
#7 is telco as is, no need to remove anything, not sure if you can cut the gold finger off or not
#8 Peripheral
#9 again, only the white socket is counted on these, as they aren't a dual CPU board, large socket probably
#10 All peripheral, floppy drive boards are like this too, the pins make it peripheral I believe
#11 peripheral no need to remove anything
#12 gold finger card and the board you are pointing too is probably peripheral if you take it off
#13 telco with or without the large items on it
#15 Probably gold finger card, slot processors usually have a green board only a few chips along with one large one and the fingers look different
#16 May be telco without the large transformer, not entirely sure
#17 Peripheral without the chips and may be telco with them, not sure.


Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sat Sep 17, 2016 10:06 pm 

Joined: Fri Jul 01, 2016 6:55 pm
Posts: 184
Location: Texas
#2 looks like a gold finger board....my guess is that's a sound or video card not a slot processor.


Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sat Sep 17, 2016 11:00 pm 

Joined: Thu Aug 25, 2016 8:49 pm
Posts: 19
You are correct. I took these pictures weeks ago and just uploaded them. Looking close I see the VGA input. Definitely video card. Just wasn't sure because of all the iCs.


Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sun Sep 18, 2016 1:17 am 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3329
Location: Low DOS
I'll be back

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sun Sep 18, 2016 10:43 am 

Joined: Thu Aug 25, 2016 8:49 pm
Posts: 19
LOL Am I the only one that read Lost's post in the Terminator's voice? ROF Thanks Lost, I am not in a big hurry. I think where I am getting confused is it the board has a slot for a board processor I want to call it a dual socket since it has the regular CPU and a Slot processor on board. That is giving me fits. I have read so many posts/identifications that it is all blurry to me now. :(


Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sun Sep 18, 2016 2:08 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3329
Location: Low DOS
In order

1)Large socket
2)Telco (video card)
3)Large socket (laptop)
4)Large socket
5)Peripheral
6)Peripheral or small socket can't see whole board
7)telco, it's fine
8)peripheral
9)large socket
10)all peripheral
11)no; both peripheral
12) finger card
13)telco as is
14)? Hey where's 14??? ;)
15)finger card
16)nope; still peripheral
17)fingers on this are nickel and it's peripheral

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sun Sep 18, 2016 10:20 pm 

Joined: Thu Aug 25, 2016 8:49 pm
Posts: 19
Thanks for getting back to me with this. Will be saving your idents with pics to my computer for future reference. Tomorrow I will delete this post to clean just a little clutter! Thanks again.


Top
 Profile  
 
 Post subject: Re: Some pics for ident.
PostPosted: Sun Sep 18, 2016 11:25 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3329
Location: Low DOS
No need to delete; it's good for everyone.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: