Boardsort.com • View topic - What are these classed as, Large socket?

Page 1 of 1

[ 9 posts ]

Previous topic | Next topic

Author

Message

Ewaste-is-the-Key

Post subject: What are these classed as, Large socket?

Posted: Mon Jan 23, 2017 10:51 pm

Joined: Sun Jan 08, 2017 4:44 pm
Posts: 12

Please just put the card to the board type.

Attachments:

DSC01386.JPG [ 2.88 MiB | Viewed 2573 times ]

DSC01385.JPG [ 2.91 MiB | Viewed 2573 times ]

DSC01384.JPG [ 2.84 MiB | Viewed 2573 times ]

DSC01370.JPG [ 2.57 MiB | Viewed 2573 times ]

DSC01369.JPG [ 2.93 MiB | Viewed 2573 times ]

Top

Ewaste-is-the-Key

Post subject: Re: Chip removel for boards pictured above.

Posted: Mon Jan 23, 2017 11:18 pm

Joined: Sun Jan 08, 2017 4:44 pm
Posts: 12

If I remove the removable IC chips and Eproms from the sockets of boards 6, 8, and 9 of spades will it down grade the boards and if so to what grade. Also if I just only take a couple IC/Eproms off of each of these boards would the grade stay the same?

Top

lostinlodos

Post subject: Re: What are these classed as, Large socket?

Posted: Mon Jan 23, 2017 11:27 pm

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4645
Location: Low DOS

9)peripheral remove Dallas box
8)telco remove Dallas boxes
6)peripheral
3)large socket remove pentium and send separate
Snip the battery loose CAREFULLY, below the isa ports.
2)large socket

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.

Top

lostinlodos

Post subject: Re: What are these classed as, Large socket?

Posted: Mon Jan 23, 2017 11:30 pm

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4645
Location: Low DOS

9 remove ICs peripheral either way
8 no touch (leave ICs in)
6 no touch, your probably at midgrade without the 924s

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.

Top

lostinlodos

Post subject: Re: What are these classed as, Large socket?

Posted: Mon Jan 23, 2017 11:34 pm

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4645
Location: Low DOS

Hey MLS; can you spy what's missing on the soc7 board?
Hint not the second socket 7

Bonus points if you can say why it's missing.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.

Top

deisdude

Post subject: Re: What are these classed as, Large socket?

Posted: Tue Jan 24, 2017 7:55 pm

Joined: Tue Sep 01, 2015 7:23 am
Posts: 146

What is a Dallas box? Should it be removed to increase value?

Top

lostinlodos

Post subject: Re: What are these classed as, Large socket?

Posted: Tue Jan 24, 2017 8:05 pm

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4645
Location: Low DOS

The Dallas box is a battery and must be removed before sending in your order. They're socketed like standard ICs bit boardsort doesn't take them or anything containing them if attached on reception.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.

Top

deisdude

Post subject: Re: What are these classed as, Large socket?

Posted: Wed Jan 25, 2017 9:52 am

Joined: Tue Sep 01, 2015 7:23 am
Posts: 146

Thank you Lostinlodos! Your generosity with your knowledge is a huge help and blessing! I will make sure to remove these.

Top

lostinlodos

Post subject: Re: What are these classed as, Large socket?

Posted: Wed Jan 25, 2017 7:39 pm

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4645
Location: Low DOS

By the way what's missing is the jumper pins for setting channels. This was an institution board. Settings are made on a prom and not the board for security.
Education, banking, or manufacturing were the common destinations.

Ctr shift F6 was the usual boot command to load the screen up.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.

Top

Page 1 of 1

[ 9 posts ]