Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Thu Jun 04, 2020 7:28 am

Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Fri Jun 20, 2014 9:58 pm 

Joined: Wed Apr 16, 2014 1:42 pm
Posts: 25
what kind of chip is on this finger card?

File comment: Back of the card.
20140620_181337.jpg [ 3.62 MiB | Viewed 2513 times ]
File comment: Zoom on the chip
20140620_181322.jpg [ 2.89 MiB | Viewed 2513 times ]
20140620_181307.jpg [ 3.27 MiB | Viewed 2513 times ]
PostPosted: Fri Jun 20, 2014 11:49 pm 
User avatar

Joined: Fri Feb 14, 2014 10:57 pm
Posts: 95
If that is socketed in and you can pull it off the card, it may go as a Double Sided Gold CPU, look here

PostPosted: Sat Jun 21, 2014 12:04 am 
User avatar

Joined: Sat Feb 22, 2014 11:16 am
Posts: 166
Location: Newell, Iowa
That chip is for sure directly soldered onto the card. Could try a heatgun on the back side to remove it. I've removed a few just like that with a propane torch on the back side, but it takes practice to not ruin the chip.

PostPosted: Mon Jun 23, 2014 12:33 pm 
Reputable Seller

Joined: Fri Jan 31, 2014 10:22 am
Posts: 769
If you don't want to risk damaging components, leave the chip on the card. I believe boardsort will toss the card into the new category of boards where you have gold cap chips soldered onto a board, which is paying more than telecom grade.

Forum Moderator

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: