Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Sun Nov 19, 2017 11:51 pm


Post new topic Reply to topic  [ 126 posts ]  Go to page 1, 2, 3, 4, 5 ... 13  Next
Author Message
 Post subject: Need help with board ID
PostPosted: Wed Mar 22, 2017 9:38 pm 

Joined: Wed Mar 08, 2017 11:25 am
Posts: 64
I recently bought a huge 7 pallet lot at a local auction of city traffic light controllers and cameras. Roughly 100 control boxes and 35 pelco cameras.
These are some of the boards. Not sure if they are going as telecom, gold finger boards, and or what? Board 1 is a finger card and a female gold pined card, board 2 has alot of IC chips and some gold/yellow colored caps ( will remove all large caps on these boards), and board set 3 is stacked, one has gold fingers, the other is full of IC chips. I will remove the aluminum brackets and any screws/stand-offs. Theres roughly 2000lbs of aluminum total here.


Attachments:
File comment: lot 2
traffic lot 2.jpg
traffic lot 2.jpg [ 185.32 KiB | Viewed 2190 times ]
File comment: lot 1
traffic lot 1.jpg
traffic lot 1.jpg [ 144.21 KiB | Viewed 2190 times ]
File comment: board set 3
board 3.jpg
board 3.jpg [ 175.04 KiB | Viewed 2190 times ]
File comment: board 2
board 2.jpg
board 2.jpg [ 171.24 KiB | Viewed 2190 times ]
File comment: board 1
board 1.jpg
board 1.jpg [ 154.56 KiB | Viewed 2190 times ]
Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 11:12 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3543
Location: Low DOS
Big pile of mixed electronics

Big pile of mixed electronics

Top peripheral bottom probably gfc but need to see rest

Borderline. I lean peripheral see if MLS has thought

Both peripheral. If Remove fingers you'd get low grade



Remove all brackets from this stuff to get mentioned grades

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
PostPosted: Thu Mar 23, 2017 7:57 pm 

Joined: Wed Mar 08, 2017 11:25 am
Posts: 64
This bottom one (board 4) is the board pictured above as gold finger, there is a small "push button" tan board next to it. Then 2 more, board 5 and 6.


Attachments:
File comment: board 6
board 6.jpg
board 6.jpg [ 147.07 KiB | Viewed 2156 times ]
File comment: board 5
board 5.jpg
board 5.jpg [ 134.96 KiB | Viewed 2156 times ]
File comment: gold finger and push button
board 4.jpg
board 4.jpg [ 151.66 KiB | Viewed 2156 times ]
Top
 Profile  
 
PostPosted: Thu Mar 23, 2017 10:24 pm 

Joined: Fri Jan 31, 2014 12:53 pm
Posts: 425
I would agree with lodos's assessment... pull the two cards apart and get Goldfinger card for the one half.


Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 2:40 am 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3543
Location: Low DOS
The tan one is midgrade
5 is telco but if you remove anything it will be peripheral
6, first board, is peripheral

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 7:32 am 

Joined: Wed Mar 08, 2017 11:25 am
Posts: 64
Sounds good. That board 5 did have a large transformer on it (a few pounds) that I had to pull off. There will be a lot of boards like that one in this lot for sure. As I get more pulled, ill post more pics. I appreciate your help.


Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 10:15 am 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3543
Location: Low DOS
Looks like you pulled a big capacitor from 5 two, which is a good idea. You'd have had peripheral if they were on there

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 11:20 am 

Joined: Wed Mar 08, 2017 11:25 am
Posts: 64
yes, all large cylinder caps I pull off. That board didn't have a transformer now that I remember, that was another one I have yet to post. There should be a lot of telecom boards in this pile of equipment considering what it did for traffic signaling.


Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 6:01 pm 

Joined: Wed Mar 08, 2017 11:25 am
Posts: 64
another one, same board top and bottom.


Attachments:
File comment: board 7 top
board 7 top.jpg
board 7 top.jpg [ 131.95 KiB | Viewed 2097 times ]
File comment: bottom board 7
board 7 bottom.jpg
board 7 bottom.jpg [ 120.23 KiB | Viewed 2097 times ]
Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 7:46 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3543
Location: Low DOS
Peripheral
It's incomplete flashing and not a sandwich board

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 126 posts ]  Go to page 1, 2, 3, 4, 5 ... 13  Next

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: