Welcome to Boardsortâ„¢ - Learn - Sell - Profit -

Learn to properly Sort, Sell, and Profit from your electronic scrap material.
It is currently Thu Mar 28, 2024 9:23 am


Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue Mar 21, 2017 6:52 pm 

Joined: Tue Sep 01, 2015 7:23 am
Posts: 158
Hi,

So I have been going through my GFCs and found a few more to double check.

I have about 110 pounds worth of GFC at this point and hope to be traveling to Ohio in mid-April.

I did notice on some of the cards tiny transformers, and ferrite rings with a copper wind. Do they need to be pulled?


Attachments:
FullSizeRender(31).jpg
FullSizeRender(31).jpg [ 1.2 MiB | Viewed 5925 times ]
Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 4:02 am 
User avatar

Joined: Sat Mar 15, 2014 10:03 am
Posts: 326
deisdude wrote:

I did notice on some of the cards tiny transformers, and ferrite rings with a copper wind. Do they need to be pulled?
nope there are goldfinger cards
with stuff like that on them.vga cards for example and lots of modem cards also have tiny transformers as well..
-------
in the middle of your pic its a peripheral board maybe some thing better if thats gold flashing cant really see to well..


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 1:33 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9751
Location: Low DOS
The qi board is telco
Middle little guy is peripheral
Rest finger card

Don't need to remove anything

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
PostPosted: Thu Mar 23, 2017 9:13 am 

Joined: Tue Sep 01, 2015 7:23 am
Posts: 158
Thank you for the help on these!

I am curious about the board on the bottom right. I thought it might have enough ICs to bump it up. What am I missing about this board, are the ICs present to few or not high value ones?


Top
 Profile  
 
PostPosted: Thu Mar 23, 2017 12:41 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9751
Location: Low DOS
The modem?
First it's in the shadow so I'm not quite sure. If those are all ICs you could get telco. If they're anything else it's going it will be gfc.
If you could post a brighter picture I could take another look.

Also as I've mentioned elsewhere I tend to look at stuff on the run. So I'm conservative when it comes to grading. Sometimes border stuff will not get a long enough look. Always feel free to ask for a second look from me and always feel free to ask for a second opinion. :)

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
PostPosted: Thu Mar 23, 2017 2:32 pm 

Joined: Tue Sep 01, 2015 7:23 am
Posts: 158
Thanks for taking another look. I have attached an enhanced image of the board in question.


Attachments:
FullSizeRender.jpg
FullSizeRender.jpg [ 287.01 KiB | Viewed 5847 times ]
Top
 Profile  
 
PostPosted: Thu Mar 23, 2017 4:42 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9751
Location: Low DOS
Should be good for telco. Sorry.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: