Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Mon Oct 22, 2018 9:06 pm


Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Oct 25, 2017 1:54 am 

Joined: Wed Oct 25, 2017 12:05 am
Posts: 7
I am new to E scrapping and need some help identifying and grading some boards also what I should or should not remove to get the best prices and not de-value the boards. These boards were salvaged from servers and equipment from a recently closed telecom office. Boards #1, 2 and 3 are 16'' x 17'' in size and have over 100 of #1 and 3. All others are smaller and range in size. Have 50 to 100 plus in smaller boards. Any help would be great. Thanks
More pictures to come.


Attachments:
Board #8.jpg
Board #8.jpg [ 2.1 MiB | Viewed 910 times ]
Board #7.jpg
Board #7.jpg [ 2.06 MiB | Viewed 910 times ]
Board #6.jpg
Board #6.jpg [ 2.39 MiB | Viewed 910 times ]
Board #5.jpg
Board #5.jpg [ 2.21 MiB | Viewed 910 times ]
Board #4.jpg
Board #4.jpg [ 2.21 MiB | Viewed 910 times ]
Board #3 Pic 2.jpg
Board #3 Pic 2.jpg [ 1.96 MiB | Viewed 910 times ]
Board #3 Pic 1.jpg
Board #3 Pic 1.jpg [ 2.16 MiB | Viewed 910 times ]
Board #2 Pic 2.jpg
Board #2 Pic 2.jpg [ 1.62 MiB | Viewed 910 times ]
Board #2 Pic 1.jpg
Board #2 Pic 1.jpg [ 1.94 MiB | Viewed 910 times ]
Board #1 Pic 3.jpg
Board #1 Pic 3.jpg [ 2.14 MiB | Viewed 910 times ]
Board #1 Pic 2.jpg
Board #1 Pic 2.jpg [ 1.95 MiB | Viewed 910 times ]
Board #1 Pic 1.jpg
Board #1 Pic 1.jpg [ 1.8 MiB | Viewed 910 times ]
Top
 Profile  
 
PostPosted: Wed Oct 25, 2017 12:33 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4648
Location: Low DOS
Server time.
8)peripheral
7)telco on big ones. Not sure on little without other side
6)gold finger card remove the Dallas box battery
5)peripheral
4)telco
3)small socket. Remove the ram and cpu to cell separate.
2)backplane
1)
Pic 3 two small ones are peripheral, big one telco
Pic 2 while technically a mobo I’d go telco here (remove the 486 if socketed)
Pic 1 I’m not sure on this. You have everything for small socket except the socket. Not sure if the bus port qualifies for a socket in this case. Wait for mls

If you have over 100 of 1/3 that means you’d have more than 100 black fibre CPUs. Possibly same in 486s! Awesomeness!

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
PostPosted: Wed Oct 25, 2017 1:16 pm 

Joined: Wed Oct 25, 2017 12:05 am
Posts: 7
Lost,
Not sure if you are confused or me. Most likely me. All three pictures of Board #1 are same board. The smaller ones are attached to the big one. Just wanted to show what was under the smaller boards on the main board. Can I remove the smaller board, remove the 486 and put the smaller board back on the main board and make the entire board Telco? Hope I didn't confuse you with this reply.


Top
 Profile  
 
PostPosted: Wed Oct 25, 2017 4:20 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4648
Location: Low DOS
Ohkay I see what you have now.
Yes, remove the 486 and Dallas battery

Keeping them together doesn’t change the boards classes, unfortunately. Telco. On the big one (most likely) and peripheral for the other two.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: