Welcome to Boardsort™ - Learn - Sell - Profit -

Learn to properly Sort, Sell, and Profit from your electronic scrap material.
It is currently Thu Mar 28, 2024 6:01 pm


Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: ID help
PostPosted: Wed Nov 08, 2017 1:55 pm 

Joined: Tue Nov 03, 2015 12:28 am
Posts: 29
Have an assortment of boards needing help identifying. Any help as always is greatly appreciated! You guys take care of us! Thank you!


Attachments:
20171108_105127.jpg
20171108_105127.jpg [ 3.74 MiB | Viewed 5217 times ]
20171108_104526.jpg
20171108_104526.jpg [ 3.65 MiB | Viewed 5217 times ]
20171108_104203.jpg
20171108_104203.jpg [ 3.2 MiB | Viewed 5217 times ]
20171108_103943.jpg
20171108_103943.jpg [ 2.91 MiB | Viewed 5217 times ]
20171108_103901.jpg
20171108_103901.jpg [ 2.71 MiB | Viewed 5217 times ]
20171108_103730.jpg
20171108_103730.jpg [ 3.84 MiB | Viewed 5217 times ]
20171108_103617.jpg
20171108_103617.jpg [ 4.05 MiB | Viewed 5217 times ]
Top
 Profile  
 
 Post subject: Re: ID help
PostPosted: Wed Nov 08, 2017 4:37 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9752
Location: Low DOS
1)cd/dvd boards
2)1 cd/dvd board, two fingered cards are peripheral
3)looks like hard drive boards
4)peripheral
5)telco
6)top telco bottom peripheral
7)cd/dvd boards

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
 Post subject: Re: ID help
PostPosted: Wed Nov 08, 2017 6:29 pm 

Joined: Mon Apr 14, 2014 12:41 pm
Posts: 558
in the second to last image where you have a telecom and a peripheral boards, the telecom board seems to have a small ceramic cpu. I think that cpu can go for Foreign Motorola Cpu grade. There is also a white IC chips kind of blurry but if the top is gold plated you may have here a 8086 Gold Cap with Gold Legs IC. If it is just a white color IC chip then just leave on the board.

Cheers


Top
 Profile  
 
 Post subject: Re: ID help
PostPosted: Thu Nov 09, 2017 10:15 am 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9752
Location: Low DOS
There’s also a lithium battery on that telco board that needs to be removed before sending it in
Unless it has a gold cap on the pin side I believe that ceramic is a stub pin pentium Mac ceramic (capless) or BGA pinless and probably soldered to begin with

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
 Post subject: Re: ID help
PostPosted: Thu Nov 09, 2017 7:07 pm 

Joined: Wed Feb 11, 2015 10:50 pm
Posts: 41
1St Picture . Left top and bottom are actually hard drive boards. Second picture the board without fingers also came from a hard drive. So does Boardsort grade some certain hard drive boards as peripheral? They look like the newer hd boards so I was wondering.


Top
 Profile  
 
 Post subject: Re: ID help
PostPosted: Thu Nov 09, 2017 11:50 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9752
Location: Low DOS
Your right on the top two or left two depending on how it loads, what o was seeing as audio pins are actually the jumper pins. Good eye.
The bare square ones won’t get hard drive class because of the design.
The sata board in that second pic looks like the bottom of a Mobile disc drive.
If it’s from a hard drive feel free to toss it in with hard drive boards.

I’m eyeballing from photos so I’m guessing on some things. When we get into Mobile and half height stuff I’m shot on the dark 50/50 etc on hdd vs dvd.
The ones with the fingers though look like tape or zip boards.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: