Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Sun Jun 17, 2018 8:22 pm


Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: MoBo Questions
PostPosted: Thu Mar 15, 2018 8:39 am 

Joined: Wed Jun 03, 2015 9:28 am
Posts: 72
A - Leave 486 on board for dual small or harvest it and go down to sm single?
B - The proc was on a board where the post it is, what the heck do I measure to grade?
C - Big white connector had a backplane with multiple Lrg socket mobo, so what does that make this?
D - Lrg single?
E - Dual Lrg Socket? Can I clip the fingers?
F - Enough for telco or just perif?


Attachments:
File comment: Leave 486 on board for dual small or harvest it and go down to sm single?
image.jpg
image.jpg [ 1.91 MiB | Viewed 282 times ]
File comment: The proc was on a board where the post it is, what the heck do I measure to grade?
image.jpg
image.jpg [ 1.6 MiB | Viewed 282 times ]
File comment: Big white connector had a backplane with multiple Lrg socket mobo, so what does that make this?
image.jpg
image.jpg [ 1.8 MiB | Viewed 282 times ]
File comment: Lrg single?
image.jpg
image.jpg [ 1.74 MiB | Viewed 282 times ]
File comment: Dual Lrg Socket? Can I clip the fingers?
image.jpg
image.jpg [ 1.84 MiB | Viewed 282 times ]
File comment: Enough for telco or just perif?
image.jpg
image.jpg [ 1.51 MiB | Viewed 282 times ]
Top
 Profile  
 
 Post subject: Re: MoBo Questions
PostPosted: Thu Mar 15, 2018 11:29 am 

Joined: Fri Jan 31, 2014 12:53 pm
Posts: 462
That 486 is not the same as the gold cap/ gold pin 486s that sell for$100/lb... it's just a standard IC chip killer that... you don't gain anything by taking it off as the board is considered larger socket.


Top
 Profile  
 
 Post subject: Re: MoBo Questions
PostPosted: Thu Mar 15, 2018 12:17 pm 

Joined: Wed Jun 03, 2015 9:28 am
Posts: 72
MLS, Thx so much, is this considered lg sock because of the age? That socket is only like 1.5" pin to pin.
Bummer on this not being the valuable 486 because I have a handful of these black ceramic 486s


Top
 Profile  
 
 Post subject: Re: MoBo Questions
PostPosted: Thu Mar 15, 2018 3:35 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4233
Location: Low DOS
A) Large socket. Yes due to age. Don’t remove the cpu, it will become peripheral

B) large socket

C) large socket

D) looks like the low end of telco here

E) dual large socket —> MLS... clip the fingers? I’m borderline and lean to no since it’s not a “true” motherboard.

F) this is one for Chris directly. I lean telco with the Philips chip in there. Where Chris is though I don’t know for sure and these have gone both ways for me.
Try emailing Chris a photo directly or see what mls says.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
 Post subject: Re: MoBo Questions
PostPosted: Thu Mar 15, 2018 3:40 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4233
Location: Low DOS
sail4life: for boardsort those goes as ICs because they generally round category values on the edge cases. They ARE worth a bit more to a gold refiner than a standard ic chip, a little, but not enough to see any movement in value on a ‘handful’ of them. A few dozen pounds and someone may up the payout a but (possibly even boardsort) but we’re talking cents per pound, not dollars.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: