Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Fri Apr 20, 2018 3:03 am


Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Any suggestions?
PostPosted: Wed Apr 04, 2018 9:34 pm 

Joined: Fri Jul 01, 2016 6:55 pm
Posts: 334
Location: Texas
Any suggestions as to how I can get this lithium battery off? There is a small gap between the board and the bottom of the battery.


Attachments:
IMG_1167.JPG
IMG_1167.JPG [ 1.14 MiB | Viewed 186 times ]
IMG_1166.JPG
IMG_1166.JPG [ 1.66 MiB | Viewed 186 times ]
Top
 Profile  
 
 Post subject: Re: Any suggestions?
PostPosted: Wed Apr 04, 2018 10:40 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4083
Location: Low DOS
These are almost always pined. My suggestion if it hasn’t been turned on in the last few months is very gently slide a standard (flat) screwdriver underneath and slowly work it loose. If it has been powered up or you don’t know you can use a box cutter to remove any external sealer and then gently rock the box loose with a plate of lock jaw, slip jaw, etc pliers.

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
 Post subject: Re: Any suggestions?
PostPosted: Wed Apr 04, 2018 11:54 pm 

Joined: Fri Jul 01, 2016 6:55 pm
Posts: 334
Location: Texas
Looking at the back of the board it appears to have pins sticking thru the board and soldered. My guess isthey have been out of service for well over a 6 months just from talking to the guys at the school where I bought them. I'm to scared to heat up and melt the solder so I will try prying it up with a screw driver.
Wait a minute I can use a wood cheisel and cut the board around it. It's mid or low grade anyway. :)


Top
 Profile  
 
 Post subject: Re: Any suggestions?
PostPosted: Thu Apr 05, 2018 3:23 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4083
Location: Low DOS
A pair of size 2 tin snips would probably be easier. Or one of those fiskars “titanium” ratcheting pruners. Best $20 pruners I ever bought. Slice right through computer boards. :)

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
 Post subject: Re: Any suggestions?
PostPosted: Thu Apr 05, 2018 9:06 pm 

Joined: Fri Jul 01, 2016 6:55 pm
Posts: 334
Location: Texas
Ohh another tool :)
I just got a small pair of frisker shears that I like really well so far.


Top
 Profile  
 
 Post subject: Re: Any suggestions?
PostPosted: Thu Apr 05, 2018 11:54 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 4083
Location: Low DOS
on amazon

_________________
-- my grades are my own and do not represent an offer from boardsort, nor are they guaranteed. Please keep that in mind.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: