Looks like a mount? I see copper. The other part, probably bronze. Found a close match for a microwave system coax port box. Disassemble? Maybe: you’re way out of my area of knowledge. Without going into detail and thinking you already know what it is: You probably have a fair bit of gold plate, silver plate, and silver, and nickel. Yes, boardsort will quote out on pins. Looks like the wire mount is going to be gold plate or brass based on surplus.
On to the boards Black with latch pins. Probably silver contacts. You need to dissect it. As is you’d loose money on a scrap class at midgrade. Wire, quotable contacts, etc break this mess down. Port board will be peripheral unless the whole sheet is just mounted steel-> for gold pin connector
If you can remove the aluminium heat sink peripheral, with that finger
Telco
Backplane with finger. Peripheral without
Peripheral as is. If you have enough those fuses are likely nickel cobalt. Most surplus fusing under the company comes up as such.
_________________ 42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D
|