Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Tue Oct 24, 2017 12:10 am


Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Slot processor
PostPosted: Sat Mar 22, 2014 8:02 pm 

Joined: Wed Jan 29, 2014 12:07 pm
Posts: 119
If I pull the board from the processor what CPU chip does it fall under?


Top
 Profile  
 
 Post subject: Re: Slot processor
PostPosted: Sun Mar 23, 2014 6:44 pm 
Reputable Seller

Joined: Fri Jan 31, 2014 10:22 am
Posts: 751
It may downgrade the board from slot processor to fingered card should the fingers remain intact. If the fingers get removed along with the actual chip, you will be looking at a mid-grade board most likely. My advice is don't remove it so you can get slot processor pricing.

_________________
kgryczan
Forum Moderator


Top
 Profile  
 
 Post subject: Re: Slot processor
PostPosted: Mon Mar 24, 2014 10:39 am 
Site Admin
User avatar

Joined: Thu Sep 05, 2013 2:28 pm
Posts: 269
kgryczan wrote:
It may downgrade the board from slot processor to fingered card should the fingers remain intact. If the fingers get removed along with the actual chip, you will be looking at a mid-grade board most likely. My advice is don't remove it so you can get slot processor pricing.


I agree, the best way to sell a Slot Processor is intact. Everything said is correct about the results. The chip itself would likely pay as a NoPin because you will probably not get the pins out intact, and it will have a metal cap.

Save the time and trouble and earn the most by leaving them as is (of course you must remove it from the plastic case and heatsink, but I assume you know that.)


Top
 Profile  
 
 Post subject: Re: Slot processor
PostPosted: Mon Mar 24, 2014 8:05 pm 

Joined: Wed Jan 29, 2014 12:07 pm
Posts: 119
Thanks


Top
 Profile  
 
 Post subject: Motherboards
PostPosted: Mon Apr 14, 2014 12:28 am 

Joined: Tue Mar 11, 2014 11:55 am
Posts: 1
If I take the gold plated pins from the motherboard will it reduce the price per pound or will it stay the same?


Top
 Profile  
 
 Post subject: Re: Slot processor
PostPosted: Mon Apr 14, 2014 3:24 pm 
Site Admin
User avatar

Joined: Thu Sep 05, 2013 2:28 pm
Posts: 269
It will reduce the board considerably. How much? That depends, but it will likely be more than 1/2 only because once a board is modified, the accepted known value becomes invalid and at that point we are merely guessing on value. When it comes to buying, we like to avoid guessing so I would suggest leaving the boards unaltered.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: