Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Sat Jul 22, 2017 8:50 pm


Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Peri? Mid green?
PostPosted: Thu Apr 07, 2016 4:05 pm 

Joined: Thu Apr 07, 2016 3:11 pm
Posts: 8
Got a bunch for free. Thanks for the help.


Attachments:
image.jpeg
image.jpeg [ 1.39 MiB | Viewed 1161 times ]
Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Fri Apr 08, 2016 2:05 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3149
Location: Low DOS
Technically it's an i/oboard. It will go peripheral rate.


Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Fri Apr 08, 2016 5:08 pm 

Joined: Thu Apr 07, 2016 3:11 pm
Posts: 8
Thank you! Forgive me. I'm learning. Have a few more. Any pointers of what to look for to help my grading would also be much appreciated so I can stop bugging y'all. Specifically indicators for green vs peri. Thanks a million in advance.


Attachments:
image.jpg
image.jpg [ 2.28 MiB | Viewed 1106 times ]
image.jpeg
image.jpeg [ 2.56 MiB | Viewed 1106 times ]
image.jpeg
image.jpeg [ 3.16 MiB | Viewed 1106 times ]
image.jpeg
image.jpeg [ 2.81 MiB | Viewed 1106 times ]
image.jpeg
image.jpeg [ 3.16 MiB | Viewed 1106 times ]
Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Fri Apr 08, 2016 6:39 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3149
Location: Low DOS
1) peripheral leave the cpu in the socket
2) peripheral
3) automotive board
4)Peripheral if you can get the heatsinks off
5)automotive board

Auto boards are peripheral boards that have a sealant applied to them.


Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Mon Apr 11, 2016 12:03 pm 

Joined: Thu Apr 07, 2016 3:11 pm
Posts: 8
Your "Classifying boards" post on Friday was very helpful. Thank you. I have a few more. Front/back. Didn't want to toss the larger ones in finger and have them downgraded since they're heavy. Have quite a few so I wanted to make sure. Thanks!


Attachments:
image.jpeg
image.jpeg [ 1.64 MiB | Viewed 1065 times ]
image.jpeg
image.jpeg [ 1.68 MiB | Viewed 1065 times ]
image.jpeg
image.jpeg [ 775.63 KiB | Viewed 1065 times ]
image.jpeg
image.jpeg [ 810.64 KiB | Viewed 1065 times ]
image.jpeg
image.jpeg [ 1.03 MiB | Viewed 1065 times ]
image.jpeg
image.jpeg [ 1.18 MiB | Viewed 1065 times ]
Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Mon Apr 11, 2016 2:12 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3149
Location: Low DOS
The first pair the small board will go backplane if the pins in the sockets are gold. Otherwise peripheral.
The large one... I'm not sure. Could be telco but on the very lowest edge of that class. The board is too big for finger card so I lean to telco but if not peripheral

Second card f/b is ohkay for gold finger card.

Set of 4 top to bottom
Peripheral
Backplane
Peripheral
Peripheral (possible telco)


Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Tue Apr 12, 2016 3:17 pm 

Joined: Thu Apr 07, 2016 3:11 pm
Posts: 8
Tracking unit? Breakdown. I see more value than board. Thoughts?


Attachments:
image.jpeg
image.jpeg [ 2.41 MiB | Viewed 1037 times ]
image.jpeg
image.jpeg [ 2.63 MiB | Viewed 1037 times ]
Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Tue Apr 12, 2016 4:00 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3149
Location: Low DOS
How about a nice normal motherboard? Please. Lol
The large board should clear telco. The gps board is peripheral, if you pop the spreader Loose you may have a Better board, telc, air card or even cell class.
The sd card is gold finger as is. If a plastic shell on it you can remove the shell and get telco. The sim, there's ways you can make it better I'm not going to discuss because it's not really worth it to most people and it needs to be done exactly correct for any bump. They have a class. Not on the list for quotes so toss it in and notate it in your submission confirmation text box.
Or refine it yourself. Post it on ebay etc.
The remaining boards are peripheral.


Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Tue May 03, 2016 4:17 pm 

Joined: Thu Apr 07, 2016 3:11 pm
Posts: 8
Two on top are the same. Two on bottom are the same. Just showing front & back. Came from telephone but wasn't sure that it would clear telco.


Attachments:
image.jpeg
image.jpeg [ 2.73 MiB | Viewed 879 times ]
Top
 Profile  
 
 Post subject: Re: Peri? Mid green?
PostPosted: Tue May 03, 2016 5:57 pm 

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 3149
Location: Low DOS
Bottom one may clear telco.

Top one is peripheral


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: