Welcome to Boardsort™ - Learn - Sell - Profit -

Just gonna upload a couple boards trying to gauge what I have and need to remove for the highest grade possible. Thanks

Late reply but at least if anyone has similar boards they can see someone attempted to grade them. I am still learning so my grading may not be 100% accurate.

5226 - You would need to remove the ribbon wire. Cut the black wires down more. Lastly, I would remove the black heat sinks. I believe this is telcom grade. Not sure if low or high as I never came across any telcom boards personally.

5219 - seems to be a picture of all the boards.

5233 - at least remove the 2 plastic arms on the right side of the board in the corners. Possibly low telcom.

5234 - remove the green plastic arm in the top left of the board. Looks to be high telcom.

_________________
Learning to grade or grading to learn.

5226: the black wires are on removable wire terminals, just pull out, can cut or unscrew later. Agree on other points. The gold cap chip would make this a gold cap chip board after the test of that is done.

5233: with all the gold cap chips, leave it as is. Gold cap chip board

5234: very easy high Telco. Plastic pull can stay in this case if it's not readily removable.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort