|
It was multiple boards! Thanks for clarifying for us. As a whole unit you may be looking at low or high peripheral. I'd lean toward high if the standoffs are brass.
Top board: High Telco, just make sure that excess steel bracket/standoff comes off.
Middle: Low Telco. I see some gold pins on the right that seem to be missing their friends. Shouldn't be an issue but this one might be able to go high telco too so don't take off any value if you can help it.
Bottom: High Peripheral. Not sure what's there with the plastic, if that's all it is then your at least at high peripheral, might be able to go higher with the plastic off. If there's a chunk of steel or something annoying in there then it could go lower.
As always this is my best guess and if lostinlodos or someone with more experience says otherwise I defer to them.
_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort
|
Login
Register
E-scrap Prices
