Welcome to Boardsort™ - Learn - Sell - Profit -

Learn to properly Sort, Sell, and Profit from your electronic scrap material.
It is currently Thu Apr 18, 2024 5:05 am


Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
marked141
 Post subject: Odds and ends
PostPosted: Thu Sep 02, 2021 10:46 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 1138
Location: I'm right here :D
A few of the more unique boards leftover from my otherwise complete cleanout of a local scrap yard :D If someone can give me their opinion on grade as is and best possible grade if anything is removed I'd appreciate it.

A) I think the aluminum could be removed easily enough but would end up with two boards, one with the connecting components one without. Gold pins and through holes on both boards.

B) Probably won't separate these, nice gold pins.

C) Pins in the port are gold all the way to the board, two IC chips and lots of weight that I'll probably cut off.


Attachments:
File comment: C)Nice gold pins but lot of low value weight 2
4FE45AB2-4EC6-4F4A-8D62-35D15D31E2AF.jpeg
4FE45AB2-4EC6-4F4A-8D62-35D15D31E2AF.jpeg [ 2.09 MiB | Viewed 1598 times ]
File comment: C)Nice gold pins but lot of low value weight 1
AD389639-3F6B-4B08-B6F9-881EEAD34817.jpeg
AD389639-3F6B-4B08-B6F9-881EEAD34817.jpeg [ 2.39 MiB | Viewed 1598 times ]
File comment: B)Boards connected through blank board 2
75C723B7-6D16-45C0-9631-1D73FEE606AA.jpeg
75C723B7-6D16-45C0-9631-1D73FEE606AA.jpeg [ 2.27 MiB | Viewed 1598 times ]
File comment: B)Boards connected through blank board 1
DE2F90FC-1D1C-4542-80F0-4E27DC0A2DD4.jpeg
DE2F90FC-1D1C-4542-80F0-4E27DC0A2DD4.jpeg [ 2.19 MiB | Viewed 1598 times ]
File comment: A)Boards connected through aluminum 2
3ADFB405-1F93-4DBB-AE85-CAF3ED8EF303.jpeg
3ADFB405-1F93-4DBB-AE85-CAF3ED8EF303.jpeg [ 2.11 MiB | Viewed 1598 times ]
File comment: A)Boards connected through aluminum 1
A1B4EAF8-9DFE-447C-A04F-13EDC8D3394E.jpeg
A1B4EAF8-9DFE-447C-A04F-13EDC8D3394E.jpeg [ 3.3 MiB | Viewed 1598 times ]

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort
Top
 Profile  
 
marked141
 Post subject: Re: Odds and ends
PostPosted: Tue Sep 07, 2021 10:59 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 1138
Location: I'm right here :D
bump

:D

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort
Top
 Profile  
 
ccussins
 Post subject: Re: Odds and ends
PostPosted: Mon Sep 13, 2021 10:21 am 

Joined: Fri Oct 12, 2018 4:40 pm
Posts: 1122
C) Midgrade as is. If you remove all that junk from the board, you're probably safe at High Grade Peripheral.

B) I'm guessing Low Grade Peripheral but I'll check to be sure.

A) I would think it would be Midgrade either way. I just don't see how those few gold pins in the connectors are enough to go higher. I would separate the boards from the aluminum, and then cut the two green boards in half and throw the halves with the connectors on them in Connector Ends.
Top
 Profile  
 
ccussins
 Post subject: Re: Odds and ends
PostPosted: Fri Sep 17, 2021 2:27 pm 

Joined: Fri Oct 12, 2018 4:40 pm
Posts: 1122
Chris says that B is High Grade Peripheral.
Top
 Profile  
 
marked141
 Post subject: Re: Odds and ends
PostPosted: Fri Sep 17, 2021 3:01 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 1138
Location: I'm right here :D
Thanks for the followup ccussins!

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » What is it? Identification Forum

All times are UTC - 5 hours [ DST ]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: