Boardsort.com

Your complete E-scrap resource website. LEARN - SELL - PROFIT
It is currently Tue Dec 07, 2021 5:06 am


Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Help with ID
PostPosted: Thu Nov 18, 2021 4:30 pm 

Joined: Fri Apr 17, 2015 9:36 am
Posts: 12
Hello,

Please assist with grading the following:


Attachments:
ID 1 Front.png
ID 1 Front.png [ 2.26 MiB | Viewed 256 times ]
Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Thu Nov 18, 2021 4:31 pm 

Joined: Fri Apr 17, 2015 9:36 am
Posts: 12
Not sure if backs are needed but here they are. (wasn't letting me add two pictures to initial post)


Attachments:
ID 1 Back.png
ID 1 Back.png [ 2.18 MiB | Viewed 255 times ]
Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Thu Nov 18, 2021 11:33 pm 

Joined: Thu Feb 04, 2021 2:53 am
Posts: 121
A. Clean gold finger card
B. Clean gold finger card, and remove the battery
C. Large socket server motherboard. You can trim the fingers
D. Not sure but my best guess is backplane
E. Gold finger card
F. Gold finger card
G. Gold finger card


Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Fri Nov 19, 2021 8:34 am 

Joined: Mon Sep 02, 2019 12:00 am
Posts: 170
Generally photos of the backs are not needed, unless there are components that will add value, or ones that need removing. What will help is getting good light on your boards so the components can actually be seen and identified.


Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Fri Nov 19, 2021 9:14 am 

Joined: Fri Apr 17, 2015 9:36 am
Posts: 12
Meowpher the Ninth wrote:
Generally photos of the backs are not needed, unless there are components that will add value, or ones that need removing. What will help is getting good light on your boards so the components can actually be seen and identified.



Okay, thanks. Just wondering, are you saying my photos need better lighting or just in general?


Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Fri Nov 19, 2021 7:32 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 498
I think these photos were good enough to evaluate the boards. I've stated on a few posts recently that better photos were needed because I couldn't determine what some things were on the board, which may or may not impact the grade. Do your best to get good even lighting and if your camera resolution isn't great split a photo of 6 boards into 2/3 photos. But again, I think these pictures are good.

I also have recently asked about the backs of boards because I was bordering between two grades and knowing whether anything was on the other side of the board would have helped me decide.

So, if there's nothing on the back of the board you can omit backs but someone may still ask about the back to get a better handle on where the board should go.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort


Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Mon Nov 22, 2021 12:08 pm 

Joined: Fri Apr 17, 2015 9:36 am
Posts: 12
PickleJar wrote:
A. Clean gold finger card
B. Clean gold finger card, and remove the battery
C. Large socket server motherboard. You can trim the fingers
D. Not sure but my best guess is backplane
E. Gold finger card
F. Gold finger card
G. Gold finger card



What grade gold finger card for E, F, and G?


Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Mon Nov 22, 2021 2:37 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 498
You don't have any heatsinks or fans that I can see so it comes down to whether there's any brackets. If there's any kind of metal bracket then it would be GFC no fan no heatsink with bracket. No bracket then GFC no heatsink no fan no bracket. You can always remove brackets to upgrade the material

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort


Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Mon Nov 22, 2021 3:03 pm 

Joined: Fri Apr 17, 2015 9:36 am
Posts: 12
marked141 wrote:
You don't have any heatsinks or fans that I can see so it comes down to whether there's any brackets. If there's any kind of metal bracket then it would be GFC no fan no heatsink with bracket. No bracket then GFC no heatsink no fan no bracket. You can always remove brackets to upgrade the material



Thanks, Marked! Appreciate the help. If you have a moment, I have a few other posts that I could use some help with grading.


Top
 Profile  
 
 Post subject: Re: Help with ID
PostPosted: Mon Nov 22, 2021 4:25 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 498
I think there was enough I wasn't sure about that I left them in hopes somebody else might offer an opinion. If I can remember I'll check this evening when I'm not on my phone and get what I can.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: