Welcome to Boardsortâ„¢ - Learn - Sell - Profit -

Learn to properly Sort, Sell, and Profit from your electronic scrap material.
It is currently Fri Mar 29, 2024 6:14 am


Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: TV Boards 12-27-2021
PostPosted: Mon Dec 27, 2021 10:05 pm 

Joined: Sun May 30, 2021 8:21 pm
Posts: 55
Hey,


Here are some boards that I got out of a couple TVs. Some I am comfortable with grading, and others not so much. In the future I will not add so many boards to one post, but wanted to keep this topic consolidated. Thanks.


My thoughts:

1) Midgrade (there are a few small ICs, so not sure if it could go higher)
2) High Peripheral
3) High Peripheral
4) High Peripheral
5) Low Peripheral?
6) Low Peripheral?
7) High Peripheral
8) High Peripheral (small ICs on one side of the metal box)
9) Clean GFC (Could it go higher due to ICs on both sides?)
10) High Peripheral
11) No Clue
12) No Clue - Is that gold flashing on one side? I have about a dozen or so of these

As always, I appreciate the help. Thanks


Attachments:
IMG_20211227_170911275.jpg
IMG_20211227_170911275.jpg [ 3.69 MiB | Viewed 804 times ]
IMG_20211227_170924942.jpg
IMG_20211227_170924942.jpg [ 3.42 MiB | Viewed 804 times ]
IMG_20211227_170931307.jpg
IMG_20211227_170931307.jpg [ 3.15 MiB | Viewed 804 times ]
IMG_20211227_170943301.jpg
IMG_20211227_170943301.jpg [ 3.06 MiB | Viewed 804 times ]
IMG_20211227_170952525.jpg
IMG_20211227_170952525.jpg [ 3.19 MiB | Viewed 804 times ]
IMG_20211227_171019206.jpg
IMG_20211227_171019206.jpg [ 3.09 MiB | Viewed 804 times ]
IMG_20211227_171029251.jpg
IMG_20211227_171029251.jpg [ 2.7 MiB | Viewed 804 times ]
IMG_20211227_171040725.jpg
IMG_20211227_171040725.jpg [ 2.69 MiB | Viewed 804 times ]
IMG_20211227_171048134.jpg
IMG_20211227_171048134.jpg [ 3.22 MiB | Viewed 804 times ]
IMG_20211227_171055440.jpg
IMG_20211227_171055440.jpg [ 2.89 MiB | Viewed 804 times ]
IMG_20211227_171104278.jpg
IMG_20211227_171104278.jpg [ 3.1 MiB | Viewed 804 times ]
IMG_20211227_171146892.jpg
IMG_20211227_171146892.jpg [ 2.88 MiB | Viewed 804 times ]
IMG_20211227_171422220.jpg
IMG_20211227_171422220.jpg [ 2.68 MiB | Viewed 804 times ]
IMG_20211227_171433463.jpg
IMG_20211227_171433463.jpg [ 2.43 MiB | Viewed 804 times ]
IMG_20211227_171515072.jpg
IMG_20211227_171515072.jpg [ 2.81 MiB | Viewed 804 times ]
Top
 Profile  
 
 Post subject: Re: TV Boards 12-27-2021
PostPosted: Wed Dec 29, 2021 11:15 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 1138
Location: I'm right here :D
1) Agree; it would probably stay midgrade even if the aluminum was removed so if you have a place that pays well for aluminum then you can decide if that's worth your time.
2/3) Agree
4) Maybe bordering on low telco.
5) Agree
6) Midgrade
7) Agree
8) Agree (those boxes typically have a few ICs inside)
9) I want to agree but not sure if those can go with the GFCs
10) Tend to agree
11) Low peripheral is where I normally put those, remove any shields.
12) Should be copper; I usually put those in low grade but depending on the material some may need to go into a shred pile.

Hopefully most of that was helpful.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron