Welcome to Boardsort™ - Learn - Sell - Profit -

I'm still a bit confused about what exactly a CNC board is (and based on some of the forum posts, I'm not alone). The example photos I've seen in the forums consists primarily of boards/cards with at least one side mostly flashed in gold. I say "at least one side" because many examples don't show both sides. So, with those examples in mind, does this board, with the back side all gold, qualify as a CNC board even though there's a fair bit of "stuff" on one side? I have about a dozen boards like this one, some smaller, but the same general configuration.

Thanks!

I would say high telecom, I seem to remember reading that the "gold" on those boards is more like a very thin, almost worthless paint. I could be wrong though, so wait for someone else to respond. If there are no other responses, you should be safe in putting it in high telecom.

Thanks for the reply. I'm wondering, though, how the back of my board is different from the example below that supposedly does qualify as CNC grade:

viewtopic.php?f=4&t=21779

Not sure, either email Chris or Lostinlodos, either of them would be of more help than me.