Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sun Jul 05, 2020 6:57 am 

Joined: Mon Sep 02, 2019 12:00 am
Posts: 197
Last year, about mid summer, I got some great deals online at auction of county.city surplus electronics, as practically no one was bidding. I was able to pick pallets with a dozen or so old towers with windows xp, or 98, or vista for as little as one dollar per unit. Missing hard drives, still a profitable scrapping buy, as the twenty pound steel case more or less recovered my initial investment.
Throughout the autumn, more bidders began to bid, and often I would stop bidding when the price reached about two or three dollars per unit...again, I was buying strictly for scrap.
As of now, the competition has become too fierce for me. This month, the heavy duty field laptops went for around 30 to 50 dollars per unit, and even the Dell towers went in excess of twenty dollars each.
Last month, there were several lots that went for 14 or 15 dollars per pallet, or about 3 or 4 dollars each unit, but I had neglected to enter a higher maximum prebid, as I was expecting to bid online live. Most of those lots went for a dollar more per pallet than my max bid, with only one other bidder than me.
I did have a friendly conversation with a gentleman who had outbid me on one pallet from police surplus, where he mentioned he had installed a harddrive in a couple of the machines, costing him $50 bucks each for the hard drive, but then he sold two machines for $150-$200 each.

Now for the second part of this post: I still have a half dozen of the optiplex towers without hard drives, and a couple of smaller dell box type computers. One of these was fully working, except the main system was password protected, but it had another operation system, I forget the name, that one could use to access the internet, etc, just couldn't download or save anything.
So, a couple weeks ago, I ordered the "Xtra PC" flash drive, which is a USB stick with the Linux operating system, which supposedly allows you to boot up and use a computer that is missing a hard drive, or else just make your existing unit faster and better. I haven't tried it yet, so have no info to report on its function.


Top
 Profile  
 
PostPosted: Sun Jul 05, 2020 2:54 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9874
Location: Low DOS
Auctions rarely stay quiet for long.
Sorry users, but there’s reason I don’t post where I buy from outside of the obvious.
I’ve pointed out the obvious before though. You will eventually be bidding against the refurb market.
You can pick up a 20GB or 50GB ATA solid state drive for around $20. 120G SATA for $35.

As for passwords? Good for data protection. Bad for protection of hardware.
OS password just format the hard drive and install a new OS.
BIOS password? Swap out the bios chip with a new one. Brand new. $15 or less on eBay.
EFI and UEFI are a bit more difficult. You need to understand rom flashing etc.
But download and install OFI over the UEFI. They return to the board manufacturer site and download the UEFI flashing tool. And flash UEFI over OFI.

No hard drive? You have found one solution.
Or use a live CD or Live DVD. All nix and BSD Derivatives have a few options.
Look at the distro watch site for help.
Windows 10 also has live Windows to Go.
But that adds $80-$199 to the price.
Want a Mac compatible option on your PC? Darwin live. No Apple App Store but most non-store binaries will run.

It’s not all that difficult for the most novice of users to get a system from 1995 up and running let alone modern ones.
Generally it’s a failed part. But even electrical issues... the older the machine the bigger the components the easier the soldering.

Fixing an 8086 or Apple ][ or Commodore or kit computer is more about searching out the component number, waiting to find the part, and 2 minutes of playing with a $10 soldering stick to pop the old and seal the new.
Don’t over think it. “Pins” go in “holes”. Clean up when your done. just like reproductive activities.
That’s exactly how an old Professor explained it.
It’s that simple.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
PostPosted: Sat Aug 29, 2020 10:39 am 

Joined: Mon Sep 02, 2019 12:00 am
Posts: 197
Another online auction, and Meowpher is begging for table scraps and raiding dumpsters, because he could not afford the lot prices this time. Dell and Getac and other laptops, which I used to turn my nose up at $10 bucks each went for $600 plus for lots of 6 at auction. However, I had been in the local Walmart, and they didn't have a single laptop in stock. Same deal with the Dell Optiplex with no harddrive at auction...25 to 40 each, and these were Windows XP era.


Top
 Profile  
 
PostPosted: Sat Aug 29, 2020 1:01 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9874
Location: Low DOS
Consider entering the refurb markets? I you can’t outbid them, join them?
Lol.
The retro market rebound is going to make entries level scrap difficult.

You may need to change up your auction searches. Surplus is no longer in the scrap category.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
PostPosted: Mon Feb 21, 2022 9:36 pm 

Joined: Wed Oct 20, 2021 7:36 pm
Posts: 11
Meowpher the Ninth wrote:
Last year, about mid summer, I got some great deals online at auction of county.city surplus electronics, as practically no one was bidding.


My county had a multi thousand dollar copy machine duplicator up for bid. Starting at one dollar I bid a couple. Well no one tried to outbid me and I got for $1.00 It filled the back of my car and weighed 220 lbs. I had to tear it half down before I could even get it out. I was hoping it would have hard drive and a lot of aluminum. It was 200 pounds of steel and plastic. Had fun tearing it completely down.


Attachments:
DUPL-00.JPG
DUPL-00.JPG [ 71.96 KiB | Viewed 12493 times ]
DUPL-05.JPG
DUPL-05.JPG [ 47.53 KiB | Viewed 12493 times ]
DUPL-04.JPG
DUPL-04.JPG [ 49.49 KiB | Viewed 12493 times ]
DUPL-03.JPG
DUPL-03.JPG [ 59.74 KiB | Viewed 12493 times ]
DUPL-02.JPG
DUPL-02.JPG [ 78.8 KiB | Viewed 12493 times ]
DUPL-01.JPG
DUPL-01.JPG [ 64.54 KiB | Viewed 12493 times ]
Top
 Profile  
 
PostPosted: Mon Feb 21, 2022 9:58 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9874
Location: Low DOS
Drive motors and fusers. bulk of the weight.

I took apart a commercial Oki once and got a 60lb fuser. :facepalm:.

That stuff gets heavy and normally I pass since I can’t manhandle a 300lb plus machine into the back of my truck without some non-existent help.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
PostPosted: Tue Feb 22, 2022 12:10 pm 

Joined: Wed Oct 20, 2021 7:36 pm
Posts: 11
lostinlodos wrote:
and got a 60lb fuser

I can’t manhandle a 300lb plus machine into the back of my truck


what is a fuser?

I actually never thought about how I was going to get it in the back of my SUV. But the head IT guy told me to back up into their driveway to the IT shop and he and some other burly 20 something picked it up and set it into the hatchway. I had cardboard already there and I pushed it in the rest of the way. I am not worried about future copier purchases. There won't be any. ;)

They will be listing servers and other internet equipment. I can handle that even if I have to tear down before loading.


Top
 Profile  
 
PostPosted: Tue Feb 22, 2022 2:11 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9874
Location: Low DOS
Technically the riser is the wide bar that contains the heating elements that “fuses”, or irons, the toner into a permanent attachment to the paper

warning major ad supported page~what is a riser~

Generically it’s the entire assembly that contains the riser, the feed rollers, the toner drum, etc. generic term comes from the common ability to remove that whole assembly with just a few screws.

Other large generic pieces are the power assembly, the motor assembly, the page feed assembly.
and on commercial machines the post processing assembly with the staplers, folders, etc.


Those machines are heavy.
I’d mind ebay parts values though. The thing that keeps me coming back for them on a rare occasion.
The toner drum is the lightest item in the machine and can fetch $50+!
mint condition pickup rollers (the bar of wheels closest to the feed tray) get expensive too. Even the trays can fetch cash.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
PostPosted: Sun Aug 13, 2023 5:23 pm 

Joined: Thu Feb 13, 2020 7:37 am
Posts: 74
Location: Flatlands of Kansas
lostinlodos wrote:
Don’t over think it. “Pins” go in “holes”. Clean up when your done. just like reproductive activities.
That’s exactly how an old Professor explained it.
It’s that simple.

I know this is an old thread, but I couldn't resist. I always thought the guys who created UNIX had to be dirty old men! I was once in a Linux class with only guys in it. The teacher never did tell me what he would say instead of "Finger yourself" when he had girls in the class.


Top
 Profile  
 
PostPosted: Sun Aug 13, 2023 9:10 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9874
Location: Low DOS
Actually, dirty young and middle aged men. And two women.
I’d guess prod and poke came from the women to torture the men. Lmao

Unix as properly termed today comes from 12 projects. The main 4 from Bell Labs, UIC, and UCB. Berkeley did the vast majority of turning a bunch of individual but related project into a full fledged os.
After ATT pulled a (censored) move against those that contributed to its Unix program, saving the company from a major roadblock… a large group from, and with, Berkeley rewrite by hand every variation of ATT code to less than a dozen lines.
A significant number of young females were part of BSD (full-Berkeley Software Distribution: Unix).

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: