Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: WE BUY TANATALUM SMD
PostPosted: Mon May 03, 2021 3:52 pm 
Site Admin
User avatar

Joined: Thu Sep 05, 2013 2:28 pm
Posts: 371
We now buy Yellow and Black Tantalum SMD

We are offering to buy certain Tantalum capacitors. They must be the SMD type (surface mount) and be either yellow or black.

Attachment:
2021-05-03 14.43.14.jpg
2021-05-03 14.43.14.jpg [ 431.73 KiB | Viewed 18106 times ]


Here is the catch. You can mix the yellow and black together with no problem, BUT there must be ONLY yellow and black tantalum in your mix. If there are items other than yellow and/or black SMD tantalum in your collection, it will be purchased at a ridiculously low price. The reason being is that it is extremely time consuming for our staff to clean contaminated SMD's and we must pass that cost on.

Having said that, if you are concerned if your mix of SMD tantalum is not up to snuff, you may consider sending a small sample first to make sure you are processing and sorting correctly.

You will find the the current price of our Tantalum SMD listed under the Hardware section of our pricelist.

[edit by lostinlodos]
I’m going to temporarily interject. Having sold tantalum to another set of buyers in the past, regularly and for many many years:
Until Chris clarifies or modifies this clean means clean.
No solder. No mounts. No nickel or tin pins. No PCB. No brackets. No fins.


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Wed May 05, 2021 12:51 am 

Joined: Thu Apr 23, 2015 9:59 pm
Posts: 43
Very good news i was waiting that for years of saving them. But, what about the other tantalum. cilinder tipe with arrowed end and the old ones of mostard color with two legs??


Attachments:
tantalum.jpg
tantalum.jpg [ 141.35 KiB | Viewed 18026 times ]
Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Wed May 05, 2021 10:54 am 
Site Admin
User avatar

Joined: Thu Sep 05, 2013 2:28 pm
Posts: 371
Our plan is to later introduce those as well. As of now we are only buying the SMD type until we have a firm grasp on the viability of this. There are several pitfalls that we need to navigate in order to expand on this item.

So as of now we only buy the type in the picture.

And they must be clean of solder and extraneous material. Pure and clean.


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Wed May 05, 2021 2:40 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9852
Location: Low DOS
Luis wrote:
Very good news i was waiting that for years of saving them. But, what about the other tantalum. cilinder tipe with arrowed end and the old ones of mostard color with two legs??

Those would constitute pins. Not yet.

Each form is manufactured differently.
The SM ones are fairly simple. Contact pads. Nano wire. Tantalum.

Other forms are more on the macro scale. This is where weight ratios need to be calculated and that take more time than just figuring out a few samples.

I’ve been bare stripping stuff for a long time so I can give a bit of insight on some of these less common scrap items. SSCs, solid state capacitors, of any type have very tight ratios in construction. And each minor difference makes a major value shift.

Tldr: Pins weigh considerably more than screened pads. They’re also built and mounted very differently. They need to figure out the ratio range for different sizes. That takes time.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Wed May 05, 2021 4:41 pm 

Joined: Thu Apr 23, 2015 9:59 pm
Posts: 43
Thanks for the info, what i`m going to do is, separate them (60 pounds) the ones for sell will go in a bucket shower with water and hydrocloric one night, them wash and dry and sell. very clean material,


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Wed May 05, 2021 10:19 pm 

Joined: Thu Sep 03, 2015 11:42 pm
Posts: 1
Hi there what are these found on?


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Thu May 06, 2021 1:17 pm 

Joined: Thu Apr 23, 2015 9:59 pm
Posts: 43
I find the most in telecom boards, medical stuff 80-90`s better, allmost old boards comercial, laptops, servers. look for old stuff. the black ones make shure the mark of capacitor, don`t pic the look a like diodes


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Mon May 10, 2021 5:55 pm 

Joined: Sat Sep 02, 2017 11:31 pm
Posts: 162
Chris,

As I read in your post and that of Lost, both of your comments reiterated a number of times, absolutely clean Tantalum caps, no solder, board, pins etc.

Looking at your photograph, I do see several with a bit of metal hanging off an end or two, here and there.

If this is acceptable, then good to go.

I’m not nit picking, just want to make sure I don’t send in something sub par and down graded as such when going off of your photo.

Thanks for experimenting buying Tantalum caps. I hope it works out for everyone!

RustyFuryIII


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Mon May 10, 2021 6:31 pm 
Site Admin
User avatar

Joined: Tue Feb 03, 2015 6:57 pm
Posts: 9852
Location: Low DOS
Green good red bad. Top left corner of main photo.
Attachment:
D51893C0-5D4D-4A30-A24E-ED313C37318C.jpeg
D51893C0-5D4D-4A30-A24E-ED313C37318C.jpeg [ 876.33 KiB | Viewed 17767 times ]

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D


Top
 Profile  
 
 Post subject: Re: WE BUY TANATALUM SMD
PostPosted: Mon May 10, 2021 9:30 pm 

Joined: Sat Sep 02, 2017 11:31 pm
Posts: 162
Appreciate the clarification!

Thank you


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron