Welcome to Boardsort™ - Learn - Sell - Profit -

Hello,

I have several boards I’m looking to identify and get a price estimate for. I have attached photos of the each board below.

Could you please help me with the grading and the current price per pound for these?

Thank you!

These are likely somewhere between high peripheral and Telco. You'll also have a power supply board in one, that could be low or mid grade.

You'll want to remove the boards completely from the housings. Also unplug any cables and remove heatsinks. Then take front and back photos (unless there's absolutely nothing on one side) for a more accurate grade.

On the 6.41.22 image I see what may be brass flashing on the housing you can peel off too.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort

Step 1
Remove the fans and wires

Step 2
Remove the steel. Looks like the shells are righted so a 1” type a carbide or titanium bit will drill through and allow removal
Unscrew what you can first

Step 3
Sell for high peripheral

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D