Welcome to Boardsort™ - Learn - Sell - Profit -

Learn to properly Sort, Sell, and Profit from your electronic scrap material.
It is currently Tue Mar 31, 2026 7:30 pm

Board index » What is it? Identification Forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Previous topic | Next topic 
Author Message
MichaelS30
PostPosted: Mon Mar 30, 2026 8:35 pm 

Joined: Sun Mar 29, 2026 6:19 pm
Posts: 1
Attached below are numbered boards. I have higher quantities of these, so they are the higher priority.
Attachment:
IMG_1230.jpeg
Attachment:
IMG_1218.jpeg
Attachment:
IMG_1221.jpeg
Attachment:
IMG_1223.jpeg
Attachment:
IMG_1225.jpeg


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
Reply with quote  
marked141
PostPosted: Tue Mar 31, 2026 12:18 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 1937
Location: I'm right here :D
1. Remove the faceplate, high Telco
2. Is a gold finger card. With bracket or without if you remove it
3. Gold cap chip board. If that's a metal bracket/support on the side, remove it.
4. Not sure how much of the board is cropped out of the picture so not sure on grading.
5. Remove the Dallas box, has a battery in it. Looks like two boards, if the smaller board can be removed, if only so we can see what's on the other side and under it on the big board, please do. The purple ceramic CPU, is it socketed or soldered on? If socketed, pull it to check for a gold cap on the bottom. If soldered, you can carefully drill one or two small holes on the other side of the CPU to see if there's a gold cap.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort


Last edited by marked141 on Tue Mar 31, 2026 1:52 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
austin86
PostPosted: Tue Mar 31, 2026 1:03 pm 

Joined: Thu Jul 20, 2023 8:30 pm
Posts: 154
Location: Ohio
marked141 wrote:
1. Remove the faceplate, high Telco
2. Is a gold finger card. With bracket or without if you remove it
3. Gold cap chip board. If that's a metal bracket/support on the side, remove it.
4. Not sure how much of the board is cropped out of the picture so not sure on grading.
5. Remove the Dallas box, has a battery in it. Looks like two boards, if the smaller board can be removed, if only so we can see what's on the other side and under it on the big board, please do. The purple ceramic CPU, is it socketed or soldered on? If socketed, pull it to check for a gold cap on the bottom. If soldered, you can carefully fill one or two small holes on the other side of the CPU to see if there's a gold cap.

he only needs to remove the cover and battery from the Dallas box, the IC inside it is ok to leave.

4 is likely GFC or telco
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Board index » What is it? Identification Forum

All times are UTC - 5 hours [ DST ]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: