Welcome to Boardsort™ - Learn - Sell - Profit -

needing some assistance with what categories these would go into? Each pic is a Front/Back of the board. Also, if one can be upgraded to a better group by removing something from it, please tell me what that would be.

Thanks

Those are tricky board , I'll do my best.

from top to bottom

20260507_020218.jpg
Peripheral low maybe, if it was not for the gold fingers Id say mid grade.

20260507_020142.jpg
IDK, I don't see gold pins. so maybe low grade board???

20260507_020015.jpg
The blue board is covering up a lot of whats under the board, mabey teloc, can you get a photo of whats under the blue board

20260507_015933.jpg
high telco, its has gold fingers and lots of ICs

20260507_015815.jpg
low telco or high Peripheral

I'd lean more toward high peripheral on the first.

Second, agree it'll depend on the pins and if there's any gold plating. If there's any silver(Ag) in the silver (color) part then you'd be at least at midgrade.

Third, definitely pull the top board if it's socketed, if soldered try to cut whatever pins are connecting. I'd go ahead and remove the U shaped brace from the middle too.

Forth, concur

Fifth, as is with so much weight, high peripheral at best. Remove the brace and 8 transformers and I think it'll clear high Telco

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort

I gave it low because of the large caps, resistors and that coil and the gold fingers being a lower grade of gold. but I can see it going as high peripheral too.

I was thinking the same thing with the last one too, it might be worth cleaning up to get high telco.