what classification do these two boards fall under? one is a line card and the other is a supervisor card. Both are from a Cisco Catalyst 4500 Network Switch

Here are some closrr looks at the board as well as beneath the heat sinks. Looks like a lot of gold to me.

Removing all of the heat sinks, usually just a twist with pliers will do, will help grading.

Also that looks like a ram card on the second board(IMG_2396), should come out by pulling from the socket but may have a latch there holding it in place by it's two small round cutouts. Ram cards have their own categories depending on gold or silver fingered connectors.

As far as grades for the two main boards, I'm not confident enough to classify things too much so hopefully someone else can respond soon.

The one with the 6 large heatsinks is high peripheral, and the one with a lot of chips is at least low telecom, but could be high telecom.

Jim, could you post a picture of the entire board that is covered with chips after the above stated things have been removed? Thanks.

High peripheral (one with 6 large chips) and high telecom (one with many chips).

Battery!

Pull that off.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort

Bonus *s for marked141

Batteries

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D